Sensaphone WEB600 Users manual Bedienungsanleitung PDF herunterladen (Seite 11)

Chapter 1: Installation

InsTallaTIon

This section provides information on:

• Operating environment

• Installation

• Connecting sensors/Battery backup module

• Network Configuration

PARTS REQUIRED

• Phillips Screwdriver

• Cat 5 Patch Cable

• Network Hub, Switch, or Router that supports 10 or 100 BASE-T

• Computer w/Network Connection

OPERATING ENVIRONMENT

Before you install the Web600 be sure that your operating environment meets the physical requirements

of the equipment.

Operating Temperature: 32º–122º Fahrenheit (0º–50º C)

Humidity: 5–90 %RH, non-condensing

Power: 115VAC 60 Hz outlet within 6’

WALL MOUNT INSTALLATION

The Web600 can be wall mounted using the included dry wall anchors and screws. Follow the steps

below:

1) Install two drywall anchors (if necessary) 5” apart. Attach the Web600 using the two #6 tapping

screws.

2) Attach sensors to the zone terminals.

3) Plug the power adaptor into a 115VAC 60Hz outlet.

4) Connect a CAT5 cable to the Ethernet port and connect to a 10/100 network hub, switch or router.

TABLETOP INSTALLATION

The Web600 can be installed on a tabletop or shelf. Follow the steps below:

1) Attach the four self-adhesive rubber feet to the four corners on the bottom of the Web600.

2) Place the unit on a tabletop or shelf.

3) Attach sensors to the input terminals.

4) Plug the power adaptor into a 115VAC 60Hz outlet.

5) Connect a CAT5 cable to the Ethernet port and connect to a 10/100 network hub, switch or router.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 56 57

Keine Kommentare

Sensaphone WEB600 Users manual Bedienungsanleitung Seite 11